New Lighting Standards for Saving Energy
California estimates its efficiency standards have saved more than $36 billion in energy costs since 1978, and will save another $43 billion by 2013. Stricter efficiency standards also help avoid rolling blackouts, reduce peak demand, and avoid the need to build new generating capacity.
What does this have to do with the rest of us? Environmental concerns don’t stop at the state border. With global fuel and energy costs continually rising, it is worthwhile to take a look at the Title 24 regulations for ways to increase efficiency and energy savings for projects all across the nation.
Title 24 Requirements
Title 24 requires high efficacy lighting, occupancy sensors or dimmers in almost all spaces. In general, “high-efficacy” lighting is what we usually think of as energy-efficient lighting fixtures. Fluorescent and compact fluorescent (CFL) fixtures with electronic ballasts, as well as certain high-intensity discharge (HID) lamps fall into this category. Fluorescent and CFL fixtures with magnetic ballasts, incandescent lights and fixtures with incandescent sockets (regardless of the bulb type installed) are not considered high efficacy.
Title 24 guidelines and requirements specify the fixtures that should be used in almost all spaces for homes and buildings. Here are some of the room-by-room details:
Kitchens: At least 50% of the total wattage of the kitchen lighting must be from high efficacy lighting. Low-efficacy lighting must be controlled separately.
Bathrooms, Garages, Laundry and Utility Rooms: High-efficacy lighting or manual-on occupancy sensors are required.
Exterior Fixtures: Lighting that is attached to the home or building must be high efficacy, or a combination photo/motion sensor is required.
All Other Interior Spaces: High-efficacy lighting, occupancy sensors or dimmers are required.
Recessed Lighting: Housings must be both Type IC (insulated covered) and Type Airtight when installed in insulated ceilings.
Electronic Ballasts: Electronic ballasts (instead of magnetic ballasts) are required for all fluorescent lighting rated 13 watts or greater.
Often, when installing high-efficacy lighting in a room, it is not a simple “one for one” change. In some cases, the high efficacy lighting will have a greater light output while using less power. Other times, you’ll find you have to specify the color of light you want in a room.
Keep these guidelines in mind while working on a project:
Specify the light output (lumens): While some high-efficacy fixtures have greater light output than incandescent lights, others will have lower output. For a rule of thumb, you should be able to “lumen match” the incandescent lighting by specifying fluorescent systems that emit the same amount of lumens, while using as little as one-fourth as much power.
Specify the appropriate color: Unlike incandescent bulbs, fluorescent lamps come in a variety of colors, from cool white to warm white. For most residential applications, it is better to specify warmer lamp colors (CCT equal to 2,700 to 3,000K), as these will give a softer, more comfortable feel.
Magnetic versus electronic ballasts: All ballasts are magnetic or electronic, but the electronic ballasts are more efficient. Magnetic ballasts can flicker, hum and have slow start-ups, all of which waste energy.
Specify the light output (lumens): While some high-efficacy fixtures have greater light output than incandescent lights, others will have lower output. For a rule of thumb, you should be able to “lumen match” the incandescent lighting by specifying fluorescent systems that emit the same amount of lumens, despite using up to one-fourth as much power.
Kitchen installations: Currently, incandescent and magnetic-ballast 13 watt CFL recessed housings/downlights are some of the most popular lighting types for today’s kitchens. For an alternative, using a high-efficacy 26 watt downlight may actually allow you to reduce the total number of fixtures, while maintaining the same light level. This not only saves energy, but also saves time and labor.
About the Author
Keith is an avid member of the lighting and home furnishings industry. At Bellacor, he helps customers with various home improvement design issues including energy efficient lighting, furnishings, and decor.
Basic & Downlight Mitt installation, for thermal insulation and fire rating of 2 hours
|
|
FF130E Recessed Light Cover $14.99 TENMAT is a leading manufacturer of High Temperature Engineering Materials and Fire Protection Components. The TENMAT FF130E Insulation Protection Cover is made out of a fire resistant material and was specifically designed to protect your light fixture from insulation in the attic and to stop unwanted airleakage through your recessed light. The FF130E has been tested in accordance with UL1598 f… |
|
|
FF135 Recessed Light Cover $17.99 TENMAT is a leading manufacturer of High Temperature Engineering Materials and Fire Protection Components. The TENMAT FF135 Insulation Protection Cover is made out of a fire resistant material and was specifically designed to protect your light fixture from insulation in the attic and to stop unwanted airleakage through your recessed light. The FF135 has been tested in accordance with UL1598 for… |
|
|
… |
|
|
Halo H7ICAT Air Tite Recessed Downlighting Incandescent 6-Inch Housing $6.50 This is the housing to use if you want a larger-aperture (six inches) lighting solution for installation in insulated ceilings. The H7ICAT offers a wide variety of trims to choose from so you can customize the unit to match your décor, finish, and desired lighting effects. The unit is air-tight with all available trims, which means no more leakage of warm air into your attic. (Compare to Halo’s H… |
|
|
Cree LR6-LE6 120V Incandescent Color (2700K) Edison Base 6 Recessed LED Downlight Eyeball Trim $113.33 Cree LR6-LE6 120V Incandescent Color (2700K) Edison Base (Standard) 6″ Recessed Adjustable Downlight with Adjustable Eyeball Trim Performance Summary Utilizes Cree TrueWhite Technology Nominal Delivered Light Output = 650 Lumens 500 Lumens at 30 Degrees Tilt Nominal Input Power = 12 Watts CRI = 90 CCT = 2700K 120V Incandescent Color Edison Base Dimmable to 20% Three Year Warranty Product Informati… |
|
|
Halo H99RT 4-Inch Non-IC Recessed Light Housing for Remodels $18.92 Looking to install discreet accent or task lighting in existing construction? Halo’s H99RT is a great option. It’s small, four-inch aperture is unobtrusive, and you can select from a variety of trims to match your décor, finish, and lighting purposes.Halo makes installation easy with an array of useful features. The H99RT can be installed from below the ceiling using the included remodel clips (t… |
